My 86 gn has a powerlogger 5.7tt chip gen2 translator ls1 maf...I bought an unfinished build..previous owner installed everything...I'm trying to sort the car....everytime I turn key on user low load setting goes to -61% fuel @1600rpm...so then before I start the car everytime I have to raise that parameter back to zero....any thoughts? Thanks for your help
User low load setting goes -61% fuel@1600rpm
- Thread starter Jb77
- Start date
Sounds like there may be something wrong with it.
You can try to do a reset, but it will reset all the values, so you'll need to know how to set it back up.
Here is from the manual on how to do a reset:
"The tune values can be reset to the factory defaults by holding the upper right keypad button for 15 seconds while powering up the unit. When the default settings have been restored, the unit will display "All data Reset!""
You can try to do a reset, but it will reset all the values, so you'll need to know how to set it back up.
Here is from the manual on how to do a reset:
"The tune values can be reset to the factory defaults by holding the upper right keypad button for 15 seconds while powering up the unit. When the default settings have been restored, the unit will display "All data Reset!""