Using The Factory 02 With Caspers Splice Possible?

[GNVYUS 1]

https://www.casperselectronics.com/...ct/product&search=02&product_id=317&search=02

Casper's offers the 02 sensor connector for both ends. It looks like on the ECU-GN inputs that the factory 02 sensor can be used as a 5V input.

I would like to run a MAP sensor off the Turbo and this location is obviously very close.

Would think I would use the output of the MAP sensor to the main wire in the 02 splice, or how can this be a stable plug and play?

Thanks

Mike

 

[EricM]

Yes you can use the old O2 input as a 5v analog input. However, you still need 5v and ground to power the sensor.