Powerlogger and translator gen 2 wb afr tracking

[Jb77]

I have a powerlogger and a gen2 translator...I understand the aem 30-4110 wb .5v signal wire goes to the anolog input of the powerlogger ...does the afr tracking work from that input to pl?....I understand that the translator gen 2 does the afr tracking? Wondering if the translator gets its own input from wb

 

[EricM]

What chip are you using? That will dictate how it gets set up.

 

[Jb77]

Extender extreme g chip

 

[EricM]

In that case the wideband needs to be connected to the Gen 2 translator, and you set up the wideband type and AFR tracking in the Gen 2 box.

 

[Jb77]

Coming from the wb I have a white 5v and blue series output..I understand that the white goes to anolog input to powerlogger..can u tell me which wires I connect to for the translator gen2 ..I attached a pic of my piggy back harness to translator

 

[EricM]

The same white wire would connect to the gen 2 for the afr signal. You would have to tap into it.

Here is what I found in the gen 2 instructions for the Wideband O2 Input: