Help

[Potlicker]

how do I get the Scanmaster g to connect to my laptop? So I can do some logging and maybe get this thing going? Thanks

 

[EricM]

You need to download and install Tunerpro RT. You also need to make sure your laptop has bluetooth capability. The instructions that came with your scanmaster talk about the bluetooth connection.
You will also need the ADX definition file to use with Tunerpro.

However, you don't necessarily need to datalog just to get the truck going. It should run ok on the chip defaults as long as everything is working ok.

 

[Potlicker]

Can't get to idle. Running really rich. I even got idle down to 0 now on idle. But still rich and killing plugs left and right. Been trying to get this thing going now for month and a half.

 

[Potlicker]

Also I got computer paired too laptop but not sure what setting needs set in turner pro to connect. I've loaded that file u listed still hit the aquire data button and the tried initialize hardware clicked about everything I know. I only get gauges no readings or connect

 

[Potlicker]

Ok it connect that time maybe other file was corrupt. And should chip be staying in open loop 24/7. I've flipped switches and and still stays in it.

 

[EricM]

It should go into closed loop when coolant is over 130 F, and the O2 sensor is working ok.
If you can record a log of it idling and attach it here, I can take a look. (or email it to me)

 

[Potlicker]

It should go into closed loop when coolant is over 130 F, and the O2 sensor is working ok.
If you can record a log of it idling and attach it here, I can take a look. (or email it to me)

Ok I'll try to do it today or tomorrow