Fuel Pressure Display Scanmaster G

[klopsdp]

Does the Scanmaster G for ecuGn have the capability of being configured to display fuel pressure. If yes, how is this accomplished. Thanks

 

[TurboBob]

yes, a couple questions.
do you have the sensor installed and working?
what version software is in your Scanmaster G (boot holding the left button)?

basically you need sensor 9 to be configured as fuel pressure in PSI, we enable that sensor channel in the CAN broadcasts, and then we enable a 'can test message' that tells the Scanmaster what the data is. This works in Scanmaster versions 1.10 and later.

I'll get the rest of the details together once we answer the basics, I was going to make a YouTube video, haven't had the chance

 

[klopsdp]

My Scanmaster G is version 1.10. Yes, I do have a fuel sensor installed and working. Thanks

 

[TurboBob]

ok, first things first, configure sensor 9 for fuel pressure in PSI, Scanmaster G 1.10 has a small bug, the aux pressure display is mis-scaled by 10, so set sensor 9 scaling to be 10x psi, i.e. 45psi should read as 450.

then make sure sensor 9 is turned on in CAN Broadcasting.

 

[TurboBob]

then you need to enable CAN test messages, and configure it.

the Scanmaster G will display Fuel pressure for Sensor 9 (and oil pressure in sensor 10)

 

[klopsdp]

Ok, that's what I needed. Thanks, much.

 

[Mike Y]

Will this method also work for the standard Scanmaster?

What other parameters can be sent to the Scanmaster?

Mike

 

[EricM]

It does not work with a standard scanmaster.

 

[ShaunKris]

yes, a couple questions.
do you have the sensor installed and working?
what version software is in your Scanmaster G (boot holding the left button)?

basically you need sensor 9 to be configured as fuel pressure in PSI, we enable that sensor channel in the CAN broadcasts, and then we enable a 'can test message' that tells the Scanmaster what the data is. This works in Scanmaster versions 1.10 and later.

I'll get the rest of the details together once we answer the basics, I was going to make a YouTube video, haven't had the chance

please do make a video, thanks in advance!!